Thank you for buying your vinyl sticker. Please follow these instructions to ensure sticker is applied correctly.

1.Make sure the area where the sticker is to be applied is clean and free of grease to ensure good adhesion. The stickers are quite easy to take off should you need to do so, but if left for a long time; they may leave a lasting mark, particularly if the surrounding area has faded as the area where the sticker is will not.

HERE'S HOW.......

It's all free but if you feel like making a donation towards costs........

.......thank-you!

2.Take your time with this next step. Gently peel back the masking tape from the vinyl backing, ensuring that the sticker remains on the masking tape as you peel it back. The masking tape acts as transfer paper that will enable you to remove the sticker from the vinyl back and allow you to place it on your selected surface. When you have successfully removed the masking tape and the vinyl underneath, you are ready to place the sticker.

3.Having decided the position of the sticker, place the masking tape that has the sticker still in place onto the surface, smoothing firmly into place. If you get this bit wrong and misplace part of it, it will almost certainly be ruined, so be careful at this step. Firmly rub the transfer down through the masking tape before gently peeling the masking tape back, this time ensuring that the sticker has transferred from the masking tape to the surface.

4.Finally, gently, but firmly, press the transfer into place.

..and that as they say, should be that, thanks again and email me if you have any comments...check out the colour chart and some other examples below......

Please allow the video time to load.